商品説明※アメリカの現地出品者により作成されたため、英語のまま掲載いたしております。2 x JAN-6189 (12AU7) Sylvania Tubes Made in USA for JAN Long Ribbed Plates O getter NOS NIB Pictures show actual Lettering may be smudged/missing Tested on Enhanced Tripplet E3444 Laboratry Tester prepared by Paul Hart 2200/2170 micromhos @ 10.4/9.7 mA 2150/2120 micromhos @ 9.9/9.8 mA Bogey(100% or New) = 2200/2200 micromhos @ 10.0/10.0 mA +/- 10% READ THIS:The measurements in this listing were taken on a Triplett 3444 modified to test the tube as an amplifier in accordance with RMA/EIA specifications, utilized by all US and most foreign tube manufacturers. This tester applies test conditions for this tube as shown below (including the precise filament voltage) and then measures trans-conductance (gm) in accordance with the engineering definition of gm. Tubes may also be operated under the test conditions for extended periods to be sure that it is stable. A tube must be tested in this manner to compare its test results with the manufacturer’s original intent or with other tubes of the same type. Most tube testers do not apply the test conditions required or conduct a valid gm test. For more details on the test and our test equipment, please contact us.The test conditions for this listing are__250_Volts plate, __250_Volts screen, ___-8.5___Volts bias or Cathode resistance* Most other testers CANNOT test tubes using the proper specifications and make up their own test results What were your tubes tested at? I do combine S&H
(2 x 6189 (12au7) Sylvania Tubes*Military Specs*Very Strong Matched Pair* NOS*NIB)
商品画像一覧
商品説明※アメリカの現地出品者により作成されたため、英語のまま掲載いたしております。2 x JAN-6189 (12AU7) Sylvania Tubes Made in USA for JAN Long Ribbed Plates O getter NOS NIB Pictures show actual Lettering may be smudged/missing Tested on Enhanced Tripplet E3444 Laboratry Tester prepared by Paul Hart 2200/2170 micromhos @ 10.4/9.7 mA 2150/2120 micromhos @ 9.9/9.8 mA Bogey(100% or New) = 2200/2200 micromhos @ 10.0/10.0 mA +/- 10% READ THIS:The measurements in this listing were taken on a Triplett 3444 modified to test the tube as an amplifier in accordance with RMA/EIA specifications, utilized by all US and most foreign tube manufacturers. This tester applies test conditions for this tube as shown below (including the precise filament voltage) and then measures trans-conductance (gm) in accordance with the engineering definition of gm. Tubes may also be operated under the test conditions for extended periods to be sure that it is stable. A tube must be tested in this manner to compare its test results with the manufacturer’s original intent or with other tubes of the same type. Most tube testers do not apply the test conditions required or conduct a valid gm test. For more details on the test and our test equipment, please contact us.The test conditions for this listing are__250_Volts plate, __250_Volts screen, ___-8.5___Volts bias or Cathode resistance* Most other testers CANNOT test tubes using the proper specifications and make up their own test results What were your tubes tested at? I do combine S&H
落札時の注意事項/良くあるご質問【お支払いについて】
弊社ショップでは、クレジットカード決済またはPayPay残高払いのみ対応しております。
万が一、お支払いの確認ができない場合には、購入のご意思が無いものとして、お取り引きをキャンセルとする場合がございます。予めご了承ください。【送料について】
ヤフオク!セカイモン店で落札いただいた商品は、全て送料無料でお届けしております。
落札金額以外にお支払いいただく費用はございませんので、ご安心くださいませ。【お届け先のご住所について】
ヤフオク!セカイモン店で落札いただいた商品は、個人使用を前提として商品の通関を行っております。
東京税関の指導により、個人輸入の配送先はお客様(輸入者)のご自宅住所1か所で、個人の氏名に限定されております。
よって商品の配送先は、個人の住所を登録してください。住所が会社や法人、団体などの場合は商用とみなされ、通関できない恐れがあります。
そのため、配送先が個人の自宅住所以外になる場合は、購入はお控えください。
【お取り引きのキャンセルについて】
落札成立後、出品者とのお取引が開始しているのでキャンセルはできません。
商品情報を十分にご確認いただいたうえで、商品を落札いただけますようお願いいたします。